Brand: Cudy
Model No: Cudy HS108ES1 Managed Switch
10G SFP+ Slots: 1
2.5G RJ45 Ports: 8
Ethernet Notes: SFP+ supports 10G/2.5G/1G speeds.
Shielded RJ45 Port: True
Extend Mode Ports: Configurable
VLAN Mode Ports: Configurable
LED: Power, Speed/Link/Act of Each Ethernet Port (2.5 Gbps), Link/Act of Each Ethernet Port (10/100/1000 Mbps)
Power Interfaces: DC Jack
Physical Buttons: Reset Button
Copper Speed and Distance: Cat. 3 or higher cable: 100 meters at 10 Mbps, Cat. 5 or higher cable: 100 meters at 100 Mbps, Cat. 5e or higher cable: 100 meters at 2.5 Gbps, Cat. 5e or higher cable: 250 meters at 10 Mbps
Copper Speed and Distance Note: 250-meter transmission is available when the port speed is set at 10 Mbps in the software.
Optical Spec and Distance: Depends on the Installed Optical Module
MAC Address Table: 4096
Max Switching Capacity: 60 Gbps
Max Forwarding Rate: 44.64 Mpps
Jumbo Frame: 9 KB
Packet Buffer: 4 Mbit
Basic Power Saving: True
Power Methods: DC
Power Input: 12V?1A
Power Adapter in the Box: Input: 100-240V~, 50/60Hz, Output: 12V?1A
Max Power Consumption: 10W (with SFP-RJ45 Module), 9W (with SFP-SC Module)
Idle Power Consumption: 3.7W
802.3 Protocols: 802.3x Flow Control, 802.3i 10BASE-T, 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3bz 2.5GBASE-T, 2.5GBASE-X, 802.3z 1000BASE-X, 802.3ae 10GBASE-R
802.1 Protocols: 802.1p: LAN Layer 2 QoS/CoS, 802.1q: VLAN Bridge Operation
Port Mirror Sessions: 1
Port Trunk Groups: 2
Max Port Num per Port Trunk Group: 4
L2 Features: Loop Prevention, 802.1Q VLAN, DSCP QoS, 802.1p QoS, Port-Based QoS
Grounding Methods: Grounding Point
Operating Temperature: 0 ? ~ 40 ? (32 ? ~104 ?)
Storage Temperature: -40 ? ~ 70 ? (-40 ? ~ 158 ?)
Operating Humidity: 10% ~ 90% non-condensing
Storage Humidity: 5% ~ 90% non-condensing
Control Methods: Config Web Page
Firmware Upgrade: Local Upgrade
Reliability: Backup and Restore
Diagnostic Tools: Ping
Dimension: 190×100×28 mm, 7.48×3.94×1.1 inches
Casing Material: Metal
Installation: Desktop, Wall-mount
