Cisco MGX 8800 Hardware Installation Switch
Cisco MGX 8800 Hardware Installation Switch Best Price & Specification
Key Features
- The main features of the Cisco 8-Port OC-12/STM-4 Channelized/Unchannelized ATM Switch Service Module are listed here.
- Full nonblocking, full-duplex line-rate throughput on all 8 ports when used on the Cisco MGX 8950 chassis
- Up to 4 ports with nonblocking, full-duplex line-rate throughput when used on the Cisco MGX 8800 chassis
- Individual port channelization down to DS-3 and OC-3c/STM-1
- Per-virtual-path and per-virtual-circuit traffic shaping and available bit rate (ABR) with virtual source and virtual destination
- APS (1:1 and 1+1) port redundancy, plus APS 1+1 card redundancy
- Up to 4 million cell buffers
- Up to 16 classes of service (CoS) that can be used to support IP or ATM services
- Support for standards-based Private Network-to-Network Interface (PNNI), switched virtual circuit (SVC) and switched virtual path (SVP),
- soft permanent virtual connection (SPVC) and soft permanent virtual path (SPVP), and Multiprotocol Label Switching (MPLS) services
Chassis Compatibility
- Cisco MGX 8830/B, MGX 8850, MGX 8850/B, MGX 8880, and MGX 8950
Software Compatibility
- Cisco MGX 8800/8900 Software Release 5.2.00 and above for Cisco MGX 8830/B, MGX 8850, MGX 8850/B, and MGX 8950
- Cisco MGX 8800/8900 Software Release 5.3.00 and above for Cisco MGX 8880
Protocols
- ATM and SONET/SDH
Port Density
- 8 ports (4 ports at full line rate on the Cisco MGX 8800 chassis)
Network Management
- Managed by Cisco WAN Manager software suite
- Based on Simple Network Management Protocol (SNMP)
Power
- Input power required: -48 VDC
- Power consumption: 134W
Physical Dimensions
- H x D: 15.83 x 15.65 in. (40.20 x 39.75 cm)
Weight
- 6.5 lb (2.95 kg)
